 |
| Use the band saw to cut out the coat rack outline. Then sand the edges thoroughly. |
 |
| Use a hand held rotary tool and a 5 1/6" carving bit to carve the bird and leaves. If you have never done carving like this, practice on a piece of scrap wood. When you are finished carving, sand the coat rack following the grain of the wood. |
 |
| Measure the size of your cap and use a brad point drill to make a hole for the cap. Don't drill to deep, just deep enough for the cap. Then drill a small hole about the size of a #8 wood screw right through the board. Now you have a small hole for the screw and a larger hole for the cap. When the rack is hung on the wall, the cap will hide the screw. |
0 komentar:
Posting Komentar
Catatan: Hanya anggota dari blog ini yang dapat mengirim komentar.